Teca Synergy Patient Interface Unit (PIU)

Consists of a Patient Interface Unit (PIU), external speaker, medical grade power supply, and a computer with Synergy System Software
Patient Interface Unit (PIU)

Size: 156 mm W x 55 mm D x 241 mm H (6.2” x 2.2” x 9.5”) Weight: Approximately 1 kg (2.2 lbs)
External Speaker
Size: 131 mm W x 66 mm D x 62 mm H (5.2” x 2.6” x 2.4”) Weight: 370 g (13 oz)

Medical Grade Power Supply

Size:129mmx77mmx42mm(5.1”x3.1”x1.7”) Weight: 510 g (1 lb 2 oz)

Power Requirements

ISO-1050VA Mains Isolation Transformer

Input 100 V-120 V/200 V-240 V, 50-60 Hz, 1050 VA max

Medical Grade Power Supply

Input: 100-240 V~, 50-60 Hz, 1A max.
Output: 15 Vdc 6A
Note: Fuses are internal (there are no user-accessible fuses)

Display

Notebook

14” TFT-LCD with maximum 1280 x 800 (WXGA) resolution

Tower

19” TFT-LCD display 1440 x 900, maximum 1280 x 1024 (WXGA) resolution

Speaker Unit

Audio Input Approximately 500 mVpk-pk for full output Maximum Power to Internal Speaker Approximately 1.75 Wrms Speaker 50 mm (2”) diameter

Synergy Language Support

Configurable to English (UK), English (US), French, German, Italian and Spanish

CareFusion Middleton WI

carefusion.com

System Architecture

Synergy Tower

Intel Core 2 Duo Processor, 3.1 GHz, 2 GB RAM, 250 GB hard drive minimum

Synergy Notebook

Intel Core 2 Duo Processor, 2.53 GHz, 2 GB RAM, 250 GB hard drive minimum

DVD ±RW
Ethernet Network Card
Printer (optional) Laser
Keyboard language-dependent(English-UKandUSA,French,German,Italian,Spanish) Mouse USB
Microsoft Office Language-dependent (English - UK and USA, French, German, Italian, Spanish)
Network Ready
Synergy Software Language-dependent (English - UK and USA, French, German, Italian, Spanish)

Operating System Software

Microsoft® Windows® XP Professional

Electrical Stimulators

Single electrical stimulator. Switchable constant voltage or constant current with a low or high range.
Repetition Rates 0.06 to 200 pps ±5% fine control
Stimulus Duration 0.02, 0.05, 0.1, 0.2, 0.5, 1.0 ms (0.02 ms ± 10%, 0.05 to 1.0 ms ± 5%) Output Type Constant Current or Constant Voltage

Range High:0-100mA,or0–300V Low:0-25mA,0–75V Delay + 0 to 9 screen divisions
Stimulus Modes Single

Amplifiers and Filters

Optically isolated amplifiers with 2 channels
Input Impedance 1000 MΩ ±10%, < 30 pF
CMRR >110 dB
Noise < 0.7 μV r.m.s (0.1 - 10 kHz bandwidth, inputs short circuited)
Low Frequency (-6 dB/octave) 0.1, 1, 3, 10, 20, 30, 50, 100, 200, 250, 300, 500, 1000 and 2000Hz(±10%) 1,1.5,2,3,5,10,20KHz

High Frequency (-12 dB/Octave) 100, 200, 250, 300, 500, 1000 Hz 1, 2, 3, 5,10K Hz (±10%)
Notch Filter 50 Hz or 60 Hz or OFF, attenuation of 25 dB minimum

Data Acquisition

A-D Conversion 16 Bit ADC
Sweep Duration 1 ms to 50 s per channel (independent control per channel) LongTraceTM Facility Continuous acquisition of up to 200 x sweep duration (1000s) Averager Mode Mean, Rectified
Artifact Rejection Configurable per channel
Display Sensitivity 0.01 μV to 100 mV/div

Other External Connectors

Stimulator A
Amplifier connection Footswitch
Temperature probe input

Standard Software

Full patient database with user-configurable fields (ODBC compliant) Protocol Wizard for user-defined test settings
On-line Report Generation software, Microsoft Office compatible On-line Help

Specifications, design options and terms quoted are subject to change without notice
© 2010 CareFusion Corporation or one of its subsidiaries. All rights reserved. Lit. No. 169-438900 Rev 01 (2010/08)